YS Type Zebra Connector

【Details】

III Dimension and Tolerance

Item	Code	Unit	0.05P	0.10P	0.18P	0.25P
Pitch	P	mm	0.05±0.015	0.10±0.03	0.18±0.04	0.25±0.07
Length	L	mm	1.0~24.0±0.10 24.1~50.0±0.15 50.1~100.0±0.20 100.1~200.0±0.30
Height	H	mm	0.8~7.0±0.10 7.1~10.0±0.15 10.1~30.0±0.20
Width	W	mm	0.5~3.0±0.10 3.1~6.0±0.20 6.1~10.0±0.50
Conduct width	TC	mm	0.025±0.01	0.05±0.02	0.09±0.03	0.13±0.04
Insulator width	TI	mm	0.025±0.01	0.05±0.02	0.09±0.03	0.12±0.04
Core width	CW	mm	0.2~1.0±0.05 1.1~4.0±0.10
Lines lope	≤2°
Remark	In order to make the connectors work well, the compression limit for the height direction of the connectors must be between 9.0%~15%, and the best compression value is 10%, and the suitable touch pressure is bigger than 20g / m m×length.

IV Outline Dimensions:
ys dimension zb.jpg

V Compression Curves:

Sample size: 0.18P x (L)30 x (H)2.0 x (W)2.0 (mm)

The width of electrode: 1.0mm

VI Design principle of conductive rubber connector

Length (mm)

Height (mm)

Width (mm)

Pitch

The glass length

reduce 0.5mm

The height between

LCD and PCB ×

(1.08~1.15).In other words, the

impression ratio

is 8%~15%, and

the best impression

ratio is 10%.

The edge width

of LCD

×(0.9~0.95)

The ratio between

each gold finger

width of PCB and

the conductive

rubber connector

must be more than

3~5.In other words, each gold

finger need touch

3~5 conducting

layer to make

sure good conductive.

Remark: If we have confirmed the height, length, width and pitch of the conductive rubber, but the LCD display is still dark, it means that the resistance is too high, and we need to add the width of conductor to improve.

昌迈科技有限公司CMAI INTERNATIONAL LIMITED

YS Type Zebra Connector